Spirit Fitness CSD-LPCE Dual Leg Press/Calf Extension

Yes — it's built and warrantied for full commercial use, with an 11-gauge steel frame, a fully enclosed 220 lb stack, and LOOS USA aircraft-grade cables rated for the heavy, all-day loading a lighter leg press isn't.

Commercial-grade isn't a marketing word here — it's what the build is rated for and what the warranty actually covers. The CSD-LPCE runs an 11-gauge steel frame, a fully enclosed 220 lb stack, and LOOS USA aircraft-grade cables, and its warranty applies in any facility type, including full commercial. That matters beyond durability: residential-grade machines typically exclude commercial use in their own fine print, which can leave a facility holding the liability if someone is hurt on under-rated equipment. A leg press takes some of the heaviest, most repeated loading on the floor, so the footplate linkage, bushings, and cables are exactly where this machine is built heavier. Paying once for a press rated for the job typically costs less over five years than replacing a residential unit and absorbing the downtime in between.

It ships free by LTL freight with a liftgate included by default, so it comes off the truck without you wrestling a heavy pallet. Professional installation is available on request.

We ship this machine free, by LTL freight, and a liftgate is included by default — so it's lowered to the ground for you rather than left as a heavy pallet you have to manage. If you have a forklift or a loading dock, just ask and we'll quote freight without the liftgate to save you the cost. It arrives disassembled on the pallet with a full illustrated manual, all tools, and hardware included; most facilities handle setup with two people. And if you'd rather not assemble it yourself, professional installation is available on request and quoted as a separate line item, so the machine can be set up and ready to use without you touching a wrench.

You come to us, not the manufacturer — Blue Sky handles the warranty claim and sources the replacement part on your behalf, so a fix doesn't turn into weeks of chasing it down yourself.

If anything ever needs a part or a repair, you deal with Blue Sky directly — we manage the warranty claim with Spirit and source the replacement for you, rather than handing you a phone number and a queue. That's deliberate: the most common frustration in this category is a machine sitting unusable while the owner waits on a part and argues over who pays the shipping, and we take that off your plate. If you'd prefer to coordinate with Spirit directly on a particular part, that's always your call — but you never have to. Keeping the machine in service is the whole point, especially on a floor where a dead station means a complaint at the front desk.

10-year frame, 5-year major moving parts, 1-year finishes, wear parts, and labor, and 6-month upholstery — a commercial warranty valid in any facility type.

This machine carries Spirit Fitness's commercial warranty, and it applies in every facility type rather than voiding the moment the machine is used commercially. Coverage runs 10 years on the frame; 5 years on the major moving components — bushings, bearings, shocks, pulleys, and guide rods; and 1 year on paint and finishes, cables, grips, the counter/timer, pull-pin, rail wheels, attachments, and labor. Upholstery is covered for 6 months. And because Blue Sky handles claims on your behalf, it's a warranty you actually use through one point of contact — not a document you end up fighting with after the fact.

It supports users up to 360 lb and fits heights from about 4'11" to 6'8". An adjustable back-pad angle and a four-bar-linkage footplate set a comfortable, aligned position for a wide range of body sizes.

The leg press/calf extension machine is rated for users up to 360 lb and is designed to fit users from roughly 4 feet 11 inches to 6 feet 8 inches tall, which covers the full range of a typical commercial membership. Fit drives both comfort and safety on a leg press: the adjustable back-pad angle sets the right starting distance for the user's leg length, and the four-bar-linkage footplate keeps the ankle in ergonomic alignment through the full range of the press, so the knees track correctly under load. The same footplate's angled lower section positions the foot for calf raises. Quick, repeatable adjustment keeps the machine moving on a busy floor and helps less mobile members get set without help.

A 220 lb selectorized stack adjusts in 5 lb increments, and a 1.2 pulley ratio raises the resistance felt at the footplate to up to roughly 264 lb at the top of the stack.

This machine uses a 220 lb selectorized weight stack that adjusts in 5 lb increments with a standard pop-pin. The footplate runs a 1.2 pulley ratio, so the resistance felt reaches up to roughly 264 lb at the top of the stack — more than the stack's face value, which gives the legs and calves a serious training load without anyone adding or changing plates. The 5 lb steps keep progression smooth, and because the same stack serves both the leg press and the calf extension, users move between movements without re-racking. The stack is fully enclosed behind translucent shrouds for safety on a busy floor.

The leg press trains the quadriceps, glutes, and hamstrings; the calf extension trains the calves (gastrocnemius and soleus). Together they cover the lower body from one station.

The leg press/calf extension machine trains the major muscles of the lower body from one station. The leg press is a compound movement that loads the quadriceps, glutes, and hamstrings together, building foundational lower-body strength that carries over to squatting, walking, and stair climbing. The calf extension isolates the gastrocnemius and soleus of the lower leg, a group most general programs under-train. Together they make a complete lower-body station that suits everyone from general members to athletes and rehab clients, and the four-bar-linkage footplate keeps the joints aligned so the load stays where it should. Covering both from one machine keeps these staples available without dedicating floor space to a separate sled press and calf unit.

It occupies about 76" L × 45" W and stands 62" tall — far less than a traditional sled press — and covers two movements in one station.

The leg press/calf extension machine occupies about 76 inches long by 45 inches wide and stands 62 inches tall. A traditional plate-loaded sled press takes far more room and only does one movement; this station presses and trains calves in a single low-profile footprint, which is a real consideration when every square foot of a gym floor has to earn its place. The low-profile tower keeps sightlines open across the room, helping supervision and keeping the space from feeling crowded. For a facility deciding what to fit into a fixed footprint, that two-in-one design — and the smaller footprint versus a sled press — is often the deciding factor.