Rubber Flooring for Change Rooms & Locker Rooms

Wet-area floors are typically specified to ANSI A326.3 — the standard for measuring dynamic coefficient of friction (DCOF) on hard surfaces under wet conditions. Most building-code adopters and insurance carriers reference an A326.3-tested surface for areas that get continuously wet, including locker rooms, shower transitions, pool decks, and post-game wet-area floors.

ECORE's HydroGrip Motivate vinyl is built specifically for wet-area / pool-deck use and carries a 5-year warranty under that application. The Class I locker-room vinyls (Bounce 2, Heritage, Baller, Balanced, Restorative, Serenity Motivate Class I) carry a 10-year prorated warranty and are surface-friction tested for the bare-foot dry-side of the locker bay. We send the published ANSI A326.3 values with the quote so your risk and facilities teams can match the spec to your code requirement.

Yes — a change room runs three distinct surface conditions, and one product rarely covers all three well. The wet zone (showers and the immediate transition out of them) needs a vinyl rated for continuous wet exposure. The dry locker bay can use a Class I vinyl or rubber laminate optimized for bare-foot comfort and cleanability. The dry-side transition into the weight-room or gym floor uses ECORE's Performance Rally or Beast lines. For the locker bay specifically, the floor sits under continuous static load from the locker bank, benches, and vanities — the relevant published standard is ASTM F970 for static-load resilience under heavy stationary equipment.

Beveled transition strips and sanitary-base trim seal the boundary between zones so water doesn't migrate into the dry side. ECORE Straight-Edge Transition and Sanitary Base accessories carry a 4-year warranty — we'll spec the right transition detail on the quote.

Specify a non-porous surface that tolerates daily sanitizer. Vulcanized rubber and ECORE's Class I vinyls are non-porous and chemically bonded — water and bodily fluids wipe up rather than soaking in, which is what feeds mildew, athlete's foot, and the locker-room odor that won't come out of carpet or sealed concrete. Chemical resistance is published against ASTM F925 — ECORE's Lab Floors data sheet publishes pass results across 40+ cleaners, disinfectants, and bodily fluids (bleach, isopropyl alcohol, betadine, blood, urine) at both 1-hour and 24-hour exposure. That's the spec to hand to the housekeeping vendor when they ask whether their sanitizer formulary is compatible with the floor.

ECORE specifies a documented cleaning protocol that maps cleanly to facility infection-control routines: E-Cleaner (daily neutral-pH cleaning), E-Strip (deep-clean stripping when buildup occurs), and E-Finish (sealing protectant). We supply all three so the housekeeping or athletic-equipment-room staff stay on the manufacturer's documented protocol — that protects both warranty coverage and the floor's long-term hygiene profile. SDS sheets for the chemistry are provided with the order.

ECORE's vinyl Class I products and HydroGrip Motivate are engineered for hose-down cleaning routines. The non-porous wear layer plus heat-welded or chemically-bonded seams stop water migration into the substrate, which is the failure mode you see on glue-down vinyl tile or sealed concrete in any high-volume locker room.

What we'll spec around to protect the warranty: floor drains placed in the wet zone, beveled transition strips at every wet-to-dry boundary, and a Sanitary Base detail that runs the floor finish 4-6 inches up the wall so spray-down cleaning doesn't lift the wall-floor joint. Standing-water exposure outside the spec'd application is a warranty exclusion — we flag the install detail on the quote so the floor is built to the same protocol it'll be cleaned with.

Standard ECORE rolls and tiles ship on a 4-6 week lead time once the spec is locked. Custom colors and water-jet-cut inlays (school logos, team marks) run 5-7 weeks. Quicker 1-3 day options exist on certain in-stock colors and quantities depending on your delivery location — worth a phone call if your season opener, hotel re-flag, or apartment turn window is already locked.

Lead estimates are listed on every quote alongside freight and (where applicable) install — so the FF&E coordinator, athletic director, or property manager sees the full timeline before signing the PO. Compare with the common alternative — a major commercial-flooring competitor's actual policy text reads: 'All equipment lead times and delivery dates given are approximates ONLY.' That's a different posture from naming a date on the quote when you're juggling a locker-room renovation against an opening date.

ECORE's Class I vinyl wear layer and Performance rubber rolls support ADA wheelchair access through the locker bay and into the gym. The smooth-rolled surface holds the rolling-resistance and turning-radius behavior wheelchair users need, and beveled transition strips at every threshold meet the 1/4-inch and 1/2-inch maximum-rise rules in the ADA Standards for Accessible Design.

For full ADA conformance you'll also need to plan the 60-inch wheelchair turning radius at locker bays and benches, accessible-shower thresholds, and clear floor space at vanities and toilet stalls. We can produce a floor walk-around through the free layout designer so your facilities team and accessibility consultant can sign off before the spec is locked.

ECORE Performance lines support custom colors and water-jet-cut inlaid logos with no minimum order. Common requests for change rooms: school mascot at the team-room entry, hotel brand mark in the spa-locker vestibule, university athletic-department wordmark across the locker bay. Per-unit price drops as quantity increases.

Custom-color and inlay orders run 5-7 weeks (vs the 4-6 week standard) and require a clean vector file (.AI, .EPS, or .SVG). Note: custom-color orders, custom-inlaid platforms, and custom-logo work are non-returnable, so we lock the artwork, color blend, and proof with you in writing before the order goes to production. Inlays are typically spec'd in the dry locker bay rather than the wet zone — the seam profile of the inlay is more critical to keep dry.

Full manufacturer warranty backed through Blue Sky Fitness Supply as your authorized ECORE Athletic dealer. If something fails, the facility calls us — we file the claim with ECORE on your behalf. You don't get the 'go talk to the manufacturer' runaround that plagues buyers from generic resellers.

Warranty length depends on the line: HydroGrip Motivate (wet-area / pool-deck) is 5 years; Class I locker-room vinyls (Bounce 2, Heritage, Baller, Balanced, Restorative, Serenity Motivate Class I) are 10 years prorated; Premium Fit and Basic Fit are 5 years; Straight-Edge Transition and Sanitary Base accessories are 4 years; Performance Rally and Beast for the gym-floor transition are 10 years prorated. Specific exclusions to know in change-room use: standing-water damage outside the spec'd application, solvent-based cleaners outside the ECORE-approved list, and use of a non-wet-rated product in a wet zone. We flag the exclusions and prorated schedule specific to your install in writing on the quote.